With the official release of the iPhone XS, the FixjeiPhone, which has been dedicated to dismantling for 30 years, has also dismantled the new 2018 flagship of Apple. The technicians who disassembled the equipment said that the iPhone XS has added more dust and watertight seals. Therefore, it is more difficult to separate the display from the body. The iPhone XS supports IP68 waterproof (the same as the iPhone XS Max) and can stay up to 30 minutes at the deepest 2 meters.
The iPhone XS and iPhone X, which are unpacked, are placed side by side, and the internal structure is very similar. The iPhone XS in the component arrangement position is not different from the iPhone X a year ago. The internal structure of the iPhone XS continues most of the design of the iPhone X, which is not surprising given the similarities between the two devices.
The main difference between the new machine and the previous generation is that on the battery, Apple started using the L-shaped battery in the iPhone X. However, the iPhone X actually has two separate battery units in an L-shaped layout. For the first time in the iPhone XS, a single L-shaped battery unit appeared, no longer a separate two.
The L-shaped lithium battery used in the iPhone XS is 2658mAh and 10.13Whr. This data is consistent with the information of the Ministry of Industry and Information Technology. The capacity of this year is indeed smaller than that of last year's X battery (2716mAh). However, Apple said that the iPhone XS's battery life increased by 30 minutes compared to X, which may be due to the new A12 chip using a 7-nanometer process to further reduce energy consumption.
Another less obvious change is the camera module in the upper right corner of the device, which looks slightly larger than the iPhone X. Considering that the XS main lens has been updated to introduce a larger pixel pitch sensor to help increase the sensitivity, the size of this part of the module has also changed.
The changes in the camera module not only affect the internal space, but also make a slight change in the size of the main camera. It turns out that the iPhone XS camera has increased the length and width of the iPhone X by about 1 mm, which is why the iPhone X phone case can't be used. One of the reasons for using it on the iPhone XS.