Home > News content

Review of nine plug-in boards supporting fast charging of iPhone 12: 18w-65w

via:驱动之家     time:2020/10/29 3:33:24     readed:504

The iPhone 12 supports 20W PD fast charging, but when you open the package of iPhone 12, you find that there is no charger in it. Don't panic. You buy a genuine Apple phone.

Apple says it no longer distributes chargers for all iPhone phones because it claims they are environmentally friendly

盘点九款支持iPhone

So the first thing for iPhone 12 users is not only to buy a PD charger directly, but also to try the recently popular PD fast charging patch panel. As a product with slow iteration, plug-in boards have come slowly in the transition from fast charging to fast charging. In 2020, some manufacturers have followed up the development of PD plug-in boards. Users do not need to insert PD chargers into the plug-in boards. Users can get fast charging of PD directly through the patch boards. This paper reviews nine types of USB PD plug-in boards on the market, and makes an introduction for you.

First of all, I sorted out a few questions that Xiaobai often mentioned, and I would like to answer them first.

Q: can USB PD fast charging plug-in board turn on fast charging for iPhone 12?

A: the iPhone 12 supports the USB PD fast charging standard. Apple's official parameters indicate that the iPhone 12 supports 20W PD fast charging. It can charge the iPhone 12 with 50% of its power within 30 minutes to quickly restore its battery life.

Q: what's the difference between USB PD and USB?

A: USB plug-in board generally refers to the old USB plug-in board with only usb-a output port and only supports 5V output. The PD plug-in board has usb-c interface and is developed based on usb-pd fast charging standard, which can provide greater DC output for digital products.

Q: can a 65W PD patch panel phone be used? Can 20V charge the mobile phone?

A: PD output module of the plug-in board is marked

Question: is the price of PD patch panel expensive?

A: the cost of the PD plug-in board will be a little higher than that of the ordinary USB plug-in board due to the built-in PD fast charging module. These models are from 79 yuan to 199 yuan, which is not expensive compared with the purchase of an extra 100 yuan PD charger.

The following is to introduce the nine types of USB PD fast charging plug-in boards on the market. For the convenience of small partners, the products are sorted by brand English sequence.

1、 Aigo patriot m0331pd (2a1c 18W)

Rubik's Cube socket is a new type of power supply equipment. It greatly reduces the area and is loved by many consumers.

Aigo patriot has also recently launched a series of new national standard Rubik's cube sockets, and has integrated 2a1c PD fast charging output module in line with the fast charging trend, which makes Rubik's cube socket evolve into PD Rubik's cube socket. It can charge mobile phones quickly without connecting a charger to Rubik's cube socket.

盘点九款支持iPhone

In the figure below is the most common type of USB plug-in board on the market at present. The strip design AC Jack and USB module are horizontally arranged. Aigo patriot PD Rubik's cube socket is designed with Chinese circle inspiration. The three AC sockets and USB modules adopt compact three-dimensional structure, which greatly reduces the floor area and makes the desktop cleaner.

盘点九款支持iPhone

USB module is above the switch button, aigo Patriot 2 A1C PD Rubik's Cube socket used a touch micro switch button, control appliances on / off no longer need frequent plugging, a finger can be easily controlled. Body part three circumference size 62 mm x 62mm x 62mm, with 1.5 meters wire.

盘点九款支持iPhone

Aigo patriot 2a1c PD Rubik's cube socket is equipped with three USB output ports. One usb-c output port supports 5v3a / 9v2a / 12v1.5a 18W USB PD fast charging output, the other usb-a port also supports 5v3a / 9v2a / 12v1.5a 18W fast charging output. There is also a conventional 5v3a usb-a output port, with a total maximum power of 18W, which can support the charging of three digital products.

盘点九款支持iPhone

The fire wire and zero line of the three AC jacks are equipped with safety doors to ensure the safety of users. In addition to the three 220 V electrical appliances, the USB module can also supply power to three digital devices. The above is the state that the fire power is fully opened after all sockets are plugged in, and the adjacent plug cables will not cause interference.

2、 Aigo patriot tm1305 (2a1c 18W)

Digital products need to carry extra chargers when they go out. The backpack full of digital products is even more unbearable. The sockets for charging laptops in hotels are often not in the ideal position, which leads to abnormal charging of exotic places. In order to solve this problem, Aigo patriot has launched a multi in one hybrid charger, which integrates the plug-in board, charger and mobile power supply to completely solve the confusion of travel users.

盘点九款支持iPhone

The appearance of Aigo patriot hybrid charger follows the business style. The overall appearance color of the product is mainly bright gray and bright black. There are four power indicator lights and a 220 V jack on the front. In the plug-in mode, usb-c supports 18W PD fast charging output, which can be used as desktop charger to directly charge mobile phones, or when the desktop patch panel is used, when there is high power demand, the high-power charger can be directly inserted into the 220 V jack for use.

盘点九款支持iPhone

The USB output module from left to right is usb-c interface, two usb-a interfaces and start power button. When the product is output as mobile power, the output voltage of USB output interface is controlled at 5V; when it works as a patch panel, usb-c supports 18W PD fast charging.

盘点九款支持iPhone

The Aigo patriot hybrid charger has a 5000mAh capacity cell, which can be used as a power bank directly without the power supply of 220 v. the output power of the charger mode is 5v2.4a, which can provide fast charging for iPhone and other devices that support apple2.4a fast charging protocol, and the capacity can meet the demand of mobile phone's one-day service. In the patch panel mode, the built-in usb-c output interface supports 18W PD fast charging, which can provide PD fast charging for mobile phones and other devices. In the plug-in board mode, it can support 220 V AC output. Whether on a desk or on a business trip, you only need the Aigo patriot 3-in-1 hybrid charger to charge the laptop phone, making it easier to go out.

3、 Bull gnv-uu2656 (65W 2a1c)

Bull, a famous brand of plug-in board, promptly followed up on usb-c patch panel, rapidly deployed PD plug-in board products, and launched a multi port patch board with power up to 65W 2a1c, with powerful performance and no need to plug a charger on the board. The maximum output power of USB interface is 18W and 65W respectively. It supports multi protocol fast charging, which can provide 65W USB PD fast charging for most mobile phones, tablets and notebooks on the market.

盘点九款支持iPhone

The bull PD fast charging plug-in board is made of PC flame-retardant material, the top surface of the body is frosted, the side body is bright, and the overall length is long and flat. A total of six AC jacks have built-in safety doors to prevent foreign bodies from invading. The distance between adjacent holes reaches 42mm, which can avoid plug fighting. In order to facilitate the use of the cable, the length of the cable is up to 1.8 m, and the thick wire core is 3 x 1.0 mm. The micro switch with integrated indicator light is used on the switch.

盘点九款支持iPhone

The socket is provided with a six-bit jack ,3 Two combination jacks and two bit jacks each three. Each AC Jack is equipped with a safety door with unilateral insertion and locking function to avoid foreign body entry and effectively prevent children from curious and playful accidents.

盘点九款支持iPhone

Plug-in board USB module has three output ports, A 65- W USB-C PD fast - filling interface, And two 18 W USB-A QC fast - filling interfaces, Support three simultaneous output, With multiple power policy configurations, Output 65 W, USB-C single use Adjust the output time to 45 W 18W、45W 5V3A and so on. Besides supporting USB PD standards, Also supports fast charging protocols such as QC/FCP/APPLE2.4A, Full HuaweiP30Pro about 2.08 hours, Full iPad Mini4 about 2.5 hours, Full Switch about 3.41 hours.

盘点九款支持iPhone

Moreover, its PDO message display USB-C port also supports the USB PD3.0 fast charge standard, has 5 V3A、9V3A、12V3A、15V3A、20V3.25A five sets of fixed voltage gear and 3.3-21 V/3A set of PPS voltage gear. Support Apple 2.4A、Samsung 5V/2A and DCP protocols, as well as QC2.0/3.0、AFC、FCP、SCP、MTK PE 2.0 multiple fast charging protocols.

4、 Deli Deli 33650 (2a1c 45W)

Deli is mainly engaged in the production of all kinds of stationery and office supplies. At present, Deli has grown into the largest comprehensive stationery supplier in China. In addition to excellent product quality, deli also has a solid channel distribution ability. We can buy competent products everywhere in first tier cities and villages. In addition to office stationery, deli also has layout plug-in board products. In 2020, when USB PD fast charging is popular, deli also follows the trend and introduces USB PD fast charging plug-in board.

盘点九款支持iPhone

The smooth and bright surface technology is used on the shell surface of the fast filling and inserting wire and inserting wire board milk white. The volume of the main part of the square structure is not large mm x 87.5mm x 30mm 87.5. The above area is the AC AC Jack area, and the following area is the USB module area. Screen on the shell

盘点九款支持iPhone

The side of the patch panel is a USB module, which shares three output interfaces, namely, two usb-a outputs and one usb-c outputs. Among them, usb-c supports USB PD fast charging function, which can provide 45W PD fast charging output, two usb-a support 5v2.4a output, and the total output power of USB module is 45W.

盘点九款支持iPhone

Deli 45W PD patch board has two AC jacks with a hole distance of 42mm, which is convenient for the equipment to use. It is full of two AC plugs and there is no fight. The three USB ports are full of power for three digital devices. Compared with the traditional patch panel with several chargers, the deli PD patch panel is much cleaner.

盘点九款支持iPhone

Use the power-z km001c USB tester to read the PDO message of Deli usb-c output port. It has a complete PDO voltage level. The five voltage levels are 5v3a / 9v3a / 12v3a / 15v3a / 20v2.25a. It supports apple 2.4a, qc2.0, qc3.0, AFC, FCP, SCP and other fast charging protocols. So many fast charging protocols can provide fast charging for most digital devices on the market.

5、 Huntkey Hangjia sst307c (1a1c 18W)

Hangjia is well-known in the power industry. Many users, such as PC power supply and charger, have used Hangjia's products. In addition to power supply, Hangjia has made great efforts in the plug-in board market. As early as a few years ago, Hangjia launched USB plug-in board. Recently, Hangjia upgraded its performance and launched Hangjia USB PD fast charging plug-in board to better serve PD fast charging equipment.

盘点九款支持iPhone

The detailed model of Hangjia PD patch board is sst307c. The shell is made of flame retardant material. The white and slender style can be integrated into different atmospheres such as home and office. There is a circular physical switch button on the top to facilitate the control of global power consumption. In addition, USB module is added to support the rapid charging of PD.

盘点九款支持iPhone

The USB module of Hangjia PD patch board is a classic 1a1c design, and the corresponding fast charging label is printed: usb-c supports 18W PD fast charging output, usb-a supports 18W QC fast charging output. The global maximum output is 18W, 1a1c configuration can adapt to the use of new and old cables and equipment.

盘点九款支持iPhone

The USB module of Hangjia PD plug-in board supports PD fast charging output. Apple, Huawei, Xiaomi, Samsung and other devices supporting PD fast charging can enjoy fast charging, and can directly charge two digital products at the same time. For high-power equipment, power supply support is provided through AC Jack.

6、 Philips sps2316g / 93 (2c1a 65W gallium nitride)

The traditional patch panel has a large volume and covers a lot of space, so there is less available space on the desktop. Philips has launched a three-dimensional design of Ferris wheel socket, with a three-dimensional size of 65mm * 65mm* 61mm, occupying only one mouse's desktop space, and the use of gallium nitride power devices in the body, so that the compact size of 65W high power output, but also equipped with a multi port fast charge output USB module.

盘点九款支持iPhone

Philips gallium nitride wheel socket design inherits the characteristics of the Ferris wheel family ID design, through the three-dimensional three-dimensional layout in three directions to set the socket, a total of three 2 Three AC plug-in, two USB-C PD fast charge export, one USB-A multi-protocol fast charge export. The AC jack supports 10 A 2500W AC transmission, and the maximum output power of the DC fast charging module is up to 65 W.

盘点九款支持iPhone

A compact 65- W gallium nitride fast - charging module, 2C1A multiport output, Maximum output power up to 65 W. Among them USB-C1、USB-C2 support power blind plug function, Any insertion of one of them yields 65 W PD of fast-charge output, Supports 5 V3A /9V3A /12V3A /15V3A /20V3.25A 5 voltage output. USB-A support V5A /5V4.5A /9V3A /12V3A /20V3A,4.5 60 W. maximum output power And has an intelligent power allocation strategy, Support three simultaneous output, Two USB output power adjusted to 45 W 18W double fast charge, Third USB adjust to 45 W 15W intelligent distribution when output at the same time.

盘点九款支持iPhone

Lip 65 W Ferris wheel socket in the small body into the high-power gallium nitride charging module, in the

7、 Philips sps2314g / 93 (2a1c 18W)

The plug-in board is usually placed on the desk for power supply. It is very cumbersome to charge various digital products with a pile of chargers plugged into the board. In order to solve the problem of consumers' desktop power consumption, Philips developed the Philips Ferris wheel fast charging socket by three-dimensional design of patch panel and rearrangement of internal structural parts.

盘点九款支持iPhone

Philips Ferris wheel fast-filled socket with three-sided Jack layout design, with three 2 The 3 AC outlet, and each built-in safety door to prevent foreign invasion, he also integrated USB fast charging module, with 2 A1C of output, no charger can directly provide fast charging services for digital products.

盘点九款支持iPhone

The USB module is configured with a usb-c PD fast charging output port, a usb-a fast charging output port, and a usb-a conventional 5V output port. The maximum support for 18W fast charging output is suitable for fast charging of mobile phones and tablets.

盘点九款支持iPhone

The unique three-sided interface division completely eliminates the situation of plug fighting. It can support the power supply of three AC equipment and the charging of three digital products. At the same time, it provides power supply guarantee for six devices.

8、 Philips sps2213g / 93 (1a1c 18W)

Besides the super-power Ferris wheel PD socket, Philips has introduced only

盘点九款支持iPhone

Philips SPS2213G/93 appearance is very special, like half the size of the Rubik's Cube, occupy a smaller space can be used under the display, also maintain the plug-in board function PD fast charge module collocation.

盘点九款支持iPhone

Semi-high volume tilt panel design with two 2 Combination Jack, AC pin panel inserted after the outlet to the equipment, the wire will not be wound.

盘点九款支持iPhone

In terms of USB module, it is equipped with a usb-a fast charging output port and a usb-c PD fast charging output port, with a maximum output power of 18W. The front opening is designed for users, which is easy to plug in and out.

盘点九款支持iPhone

When using multiple devices, Philips sps2213g / 93 socket can provide charging support for up to four devices at the same time. Two high-power products are output through AC AC charger, and two mobile phones are output through USB module.

9、 Purple rice cxp01 (65W 2a1c)

As one of the earliest plug-in board brands equipped with USB module in the market, Zimi recently launched a PD plug-in board integrated with 2a1c module, which can provide up to 65W USB PD fast charging and output, meeting the demand of tricky users.

盘点九款支持iPhone

Purple rice PD plug board all white frigid design wind layout is very neat, mainly divided into AC Jack area and USB output area, plug board equipped with six new national standard AC Jack, are three 2-hole Jack, three 2-hole Jack 3 jacks. The size of the three circumference of the wire board is 225 mm x 71mm x 28mm, and the length of the wire is 180 cm..1

盘点九款支持iPhone

A large area is reserved on the right side of 65W 2a1c plug-in board for USB output module. 2a1c configuration supports maximum 65W PD fast charging output. Two usb-a output ports, single usb-a output can provide 18W fast charging output, dual usb-a port can lock 5v3a output mode, one usb-c output port can output 65W PD fast charging when used alone.

盘点九款支持iPhone

The usb-c PDO message of Zimi 2a1c patch panel has five fixed voltage levels: 5v3a / 9v3a / 12v3a / 15v3a / 20v3.25a, and two PPS voltage levels: 5-11v3a / 5-20v3a. In terms of fast charging protocol support, AFC and FCP are supported.

盘点九款支持iPhone

The hole distance between two adjacent jacks is 42mm. When all the sockets are fully plugged in, the power can be supplied to six 220V devices and three USB devices. The 42mm large hole distance also enables it to avoid fighting between adjacent plugs.

盘点九款支持iPhone

summary

The above are the nine types of USB PD fast charging plug-in boards summarized by the charging head network. The number of their sockets ranges from double Jack to six Jack. All of them are equipped with safety doors, and all support 10A 2500W AC power transmission. As plug-in boards, they are all excellent products.

In terms of structure type, bull, Hangjia, Zimi and deli are straight board design, Philips and breakthrough are Rubik's cube design. The power of USB output module is from 18W to 65W, covering the use range of mobile phones, tablets and notebooks. The cheapest price is 79 yuan and the most expensive is 199 yuan. Small partners can choose the right products according to their own needs.

- THE END -

#patch board#iPhone 12

Link to the original text:Charging head network

China IT News APP

Download China IT News APP

Please rate this news

The average score will be displayed after you score.

Post comment

Do not see clearly? Click for a new code.

User comments